Evaluation of facial pleasantness in patients with complete and unilateral cleft lip and palate rehabilitated and submitted to orofacial harmonization.

OBJECTIVE: The objective of the present prospective case control study was to evaluate the facial pleasantness of patients with complete and unilateral cleft lip and palate at the end of interdisciplinary rehabilitation, submitted to facial fillers based on hyaluronic acid. METHODS: The study group consisted of 18 individuals with complete unilateral cleft lip and palate, aged between 18 and 40 years (mean age 29 years) of both sexes. The patients presented a concave profile with mild to moderate maxillary deficiency, with completed orthodontic treatment and conducted by means of dentoalveolar compensations without orthognathic surgery. Participants underwent facial filling procedures with hyaluronic acid (HA) in the midface, inserted by a single operator. Standard photographs in frontal norm at rest, right profile at rest, and left profile at rest were obtained from each patient at the following operative times: (T1) pre-filler and (T2) and one-month post-filler. The photographs in T1 and T2 were randomly placed on a page of a virtual album. A 5-point Likert scale was used to assess facial pleasantness. The photographs were evaluated by two groups of evaluators consisting of 18 individuals with cleft lip and palate (CLPG=18) and 18 orthodontists with experience in the treatment of clefts (OG=18). For comparison between phases T1 and T2, and between evaluators with orofacial clefts and orthodontists, the Wilcoxon test was used (p<0,05). RESULTS: People with cleft lip and palate rated their face as more pleasant after the midface filling procedure. In the perception of the orthodontists, on the other hand, the facial pleasantness remained similar after the facial filling procedure. CONCLUSIONS: The filling of the middle third of the face in patients with cleft lip and palate treated without orthognathic surgery increased the pleasantness of the face in the opinion of laypeople with cleft lip and palate.

Oral health-related quality of life, adaptation/discomfort during open bite treatment with spurs: complementary analysis from a randomized clinical trial.

This single-center trial aimed to longitudinally compare the oral health-related quality of life (OHRQOL), adaptation and discomfort during anterior open bite (AOB) treatment with lingual spurs and build-ups (SBU) versus spurs only (S) approaches. Children (7-11 years) with AOB were randomly allocated into two treatment groups (SBU or S). The Child Perception Questionnaire (CPQ8-10) was applied 1 and 12 months after installation of the appliances. Questionnaires evaluating functional adaptation and discomfort during the first month of treatment were also applied. A visual analog scale (VAS) was used in these questionnaires. Generalized mixed models were used for analyzing OHRQOL and discomfort data. Generalized linear models were used to assess adaptation outcomes (α = 0.05). The SBU group included 24 patients (7 males and 17 females; mean age 8.2 years) and the S group included 25 patients (11 males and 14 females; mean age 8.3 years). Regardless of the treatment type, overall OHRQOL scores at 12 months were 0.69 times those recorded at 1 month after the appliances installation (i.e., ~ 31% reduction; exp (ß) = 0.69; 95% CI: 0.55, 0.88). A significant interaction between treatment and time was detected for the 'functional limitations' domain. For this domain, a significant improvement from the first to the twelfth month was observed in the S group (P < 0.001). Patients in both treatment groups showed similar and easy adaptation to the appliances. Independent of the type of treatment, tongue-related discomfort decreased over time. One week and one month after the appliance's delivery, the discomfort scores were 0.19 (i.e., ~ 81% reduction; exp (ß) = 0.19; 95% CI: 0.13, 0.28; P < 0.001) and 0.02 (i.e., ~ 98% reduction; exp (ß) = 0.02; 95% CI: 0.01, 0.07; P < 0.001) times, respectively, those issued immediately after the installation of the appliances. Regardless of treatment type; overall OHRQOL improved from the first to the twelfth month of AOB treatment. The functional limitations score decreased in the S group. Children showed easy adaptation, and their discomfort decreased 1 week after the installation of the appliances.Trial registration: Clinicaltrials.gov; NCT03702881, date of registration: October 11, 2018.

Treatment stability with bonded versus vacuum-formed retainers after 12 months: A randomized clinical trial.

OBJECTIVE: To compare the clinical effectiveness of V-bend bonded retainers (BR) versus vacuum-formed retainers (VFR) regarding their capacity to maintain treatment stability and survival rates after 12 months. MATERIALS AND METHODS: Patients finishing orthodontic treatment were randomly allocated into two groups. The BR group received maxillary and mandibular BRs in the lingual surfaces of the anterior teeth. The VFR group received VFRs right after fixed appliances removal. The patients were evaluated at four time-points: at fixed appliances removal (T0), after 3 (T1), 6 (T2) and 12 months (T3). In each time-point digital models were obtained and analysed with the OrthoAnalyzer™ software. Treatment stability based on occlusal outcomes and retainers' survival rates were evaluated. Intergroup comparisons were performed using Mann-Whitney U-tests. The Kaplan-Meier survival plot and the log-rank test were employed to assess the retainers' survival. RESULTS: Both BR and VFR groups included 25 patients. The groups were comparable regarding their baseline characteristics. Up to 6 months, both retainers were equally effective; however, after 12 months, BRs were more effective in maintaining the incisors' alignment in the maxilla and the mandible compared to the VFRs. No differences were noticed in the intercanine and intermolar widths, overjet and overbite. There were no differences regarding the retainers' survivability in both arches. CONCLUSIONS: BRs were more effective in maintaining the alignment of the incisors in the maxilla and mandible compared to VFRs after 12 months. Both retainers presented the same survival rates after the same period.

Treatment of Class II malocclusion with 2-maxillary premolar extractions: Monthly vs biweekly appointments, which is more efficient?

INTRODUCTION: This study compared whether there is a difference in treatment time (TT) and efficiency when appointments are held once a month or at 2-week intervals in patients with Class II malocclusion treated with 2-premolar extractions METHODS: The patients of this retrospective sample were treated with the same orthodontic mechanics and divided into 2 groups according to frequencies of orthodontic appointments. Group 1 consisted of 18 patients (10 males, 8 females), with an initial mean age of 14.38 ± 1.38 years and appointments once a month. Group 2 consisted of 19 patients (9 males, 10 females), with an initial mean age of 14.12 ± 1.38 years and biweekly appointments. Edgewise fixed appliances with a slot size of 0.022 × 0.028 mm were used, and the anterior teeth were retracted en-masse with a rectangular wire and elastic chains. The Peer Assessment Rating and Objective Grading System indexes were measured in the dental models at the beginning and the end of treatment. Efficiency was assessed by dividing the percentage of improvement of each occlusal index concerning the multiplication of TT and the number of appointments. RESULTS: Both groups presented similar Peer Assessment Rating and Objective Grading System indexes at the end of treatment. Groups 1 and 2 presented different TTs (28.06 and 22.05 months, respectively); however, there were no differences regarding the efficiency of both protocols. CONCLUSIONS: Patients with Class II malocclusion treated with 2-maxillary premolars had significantly shorter treatment times when seen on biweekly appointments than those with monthly appointments; however, there was no difference in efficiency between protocols.

Robin Sequence Facial Profile After Conservative Treatment: A Long-Term Follow-Up.

INTRODUCTION: Robin sequence (RS) is a congenital clinical condition characterized by micrognathia, glossoptosis, and respiratory distress. Conservative methods could be responsible for releasing feeding and respiratory impairment but little information about mandibular growth is known in long-term follow-up. OBJECTIVE: Assessing the longitudinal behavior of the facial profile of individuals with isolated RS who underwent conservative micrognathia treatment using photographs during the whole craniofacial growth. METHODS: Photographs of the right facial profile of 100 patients were used (50 individuals with isolated RS and 50 individuals without craniofacial anomaly). The individuals with RS were evaluated at 3 different times (T1: infant, T2: mixed dentition, T3: permanent dentition) by measuring the facial convexity angle (FCA; G.Sn.Pog´). A comparison between T3 and control group (C), individuals without craniofacial anomalies and in permanent dentition, was also performed, checking the FCA, nasolabial angle (Ls.Sn.Cm), mentolabial fold (Li.Si.Pog´), facial inferior third (Sn.Gn´.C) angles and the ratio between middle anterior facial height and lower anterior facial height. RESULTS: The T3 group showed an increased angle of facial convexity and increased facial inferior third angle and middle anterior facial height/lower anterior facial height ratio compared with the control group. In the longitudinal evaluation of individuals with isolated RS, significant differences were identified between T1 and T2 groups and T1 and T3 groups showing that the increased facial convexity was higher in the infants and that did not change significantly between the phases of mixed and permanent dentition. CONCLUSIONS: RS showed increased facial convexity in all phases evaluated, but their convexity decreased with growth. When compared with individuals without craniofacial anomalies, the individuals continue to exhibit retrognathism in the permanent dentition. The lack of a mandible projection has led to a considerable number of orthognathic surgeries for the correction of discrepancies.

Evaluation of facial pleasantness in patients with complete and unilateral cleft lip and palate rehabilitated and submitted to orofacial harmonization

ABSTRACT Objective: The objective of the present prospective case control study was to evaluate the facial pleasantness of patients with complete and unilateral cleft lip and palate at the end of interdisciplinary rehabilitation, submitted to facial fillers based on hyaluronic acid. Methods: The study group consisted of 18 individuals with complete unilateral cleft lip and palate, aged between 18 and 40 years (mean age 29 years) of both sexes. The patients presented a concave profile with mild to moderate maxillary deficiency, with completed orthodontic treatment and conducted by means of dentoalveolar compensations without orthognathic surgery. Participants underwent facial filling procedures with hyaluronic acid (HA) in the midface, inserted by a single operator. Standard photographs in frontal norm at rest, right profile at rest, and left profile at rest were obtained from each patient at the following operative times: (T1) pre-filler and (T2) and one-month post-filler. The photographs in T1 and T2 were randomly placed on a page of a virtual album. A 5-point Likert scale was used to assess facial pleasantness. The photographs were evaluated by two groups of evaluators consisting of 18 individuals with cleft lip and palate (CLPG=18) and 18 orthodontists with experience in the treatment of clefts (OG=18). For comparison between phases T1 and T2, and between evaluators with orofacial clefts and orthodontists, the Wilcoxon test was used (p<0,05). Results: People with cleft lip and palate rated their face as more pleasant after the midface filling procedure. In the perception of the orthodontists, on the other hand, the facial pleasantness remained similar after the facial filling procedure. Conclusions: The filling of the middle third of the face in patients with cleft lip and palate treated without orthognathic surgery increased the pleasantness of the face in the opinion of laypeople with cleft lip and palate.

RESUMO Objetivo: O objetivo do presente estudo caso-controle prospectivo foi avaliar a agradabilidade facial de pacientes com fissura labiopalatina completa e unilateral ao final da reabilitação interdisciplinar, submetidos a preenchimentos faciais à base de ácido hialurônico. Métodos: O grupo de estudo foi composto por 18 indivíduos com fissura labiopalatina unilateral completa, com idade entre 18 e 40 anos (média de 29 anos), de ambos os sexos. Os pacientes apresentavam perfil côncavo com deficiência maxilar leve a moderada, com tratamento ortodôntico concluído e realizado por meio de compensações dentoalveolares sem cirurgia ortognática. Os participantes foram submetidos a procedimentos de preenchimento facial com ácido hialurônico (AH) no terço médio da face, implantado por um único operador. Fotografias padrão em norma frontal em repouso, perfil direito em repouso e perfil esquerdo em repouso foram obtidas de cada paciente nos seguintes tempos operatórios: (T1) pré-preenchimento e (T2) um mês pós-preenchimento. As fotografias em T1 e T2 foram inseridas aleatoriamente em uma página de um álbum virtual. Uma escala Likert de 5 pontos foi utilizada para avaliar a agradabilidade facial. As fotografias foram avaliadas por dois grupos de avaliadores formados por 18 indivíduos com fissura labiopalatina (GFLP=18) e 18 ortodontistas com experiência no tratamento de fissuras (GO=18). Para comparação entre as fases T1 e T2, e entre avaliadores com fissura labiopalatina e ortodontistas, foi utilizado o teste de Wilcoxon (p<0,05). Resultados: As pessoas com fissura labiopalatina avaliaram seu rosto como mais agradável após o preenchimento do terço médio da face. Já na percepção do ortodontista, a agradabilidade facial permaneceu semelhante após o procedimento de preenchimento facial. Conclusões: O preenchimento do terço médio da face em pacientes com fissura labiopalatina tratados sem cirurgia ortognática aumentou a agradabilidade da face na opinião dos leigos com fissura labiopalatina.

Challenges of a two-phase orthodontic treatment of a mandibular lateral incisor-canine transposition and a maxillary palatally displaced canine: A case report.

INTRODUCTION: The management of eruption disturbances in orthodontics may be challenging and requires a careful diagnosis and treatment planning. This case report discusses the challenges of a two-phase orthodontic treatment of a patient presenting with a dental eruption pattern anomaly. PATIENT CONCERNS: A 10-year-old boy was presented with no complaints for a routine orthodontic evaluation during mixed dentition. PRIMARY DIAGNOSES: The patient was diagnosed with a skeletal Class I malocclusion with unilateral posterior crossbite, incomplete mandibular lateral incisor-canine transposition and a unilateral maxillary ectopic canine. INTERVENTIONS: Phase 1 started with rapid maxillary expansion to correct maxillary constriction and the ectopic eruption of the right maxillary canine. In the mandibular arch, phase 1 included the extraction of the left primary lateral incisor and canine, alignment of the left permanent lateral incisor and orthodontic traction of the left permanent canine. The duration of phase 1 was 14 months. Phase 2 involved a comprehensive course of orthodontic treatment and started when the patient was aged 13 years. This phase lasted 18 months. RESULTS: An adequate dental occlusion was obtained, and the treatment results were stable after an 18-month follow-up. CONCLUSION: In this case, the early diagnosis of the dental anomalies was valuable as it allowed an early intervention to be undertaken, which resulted in overall treatment simplification and potentially minimised the adverse effects. This case report reinforces the importance of a careful follow-up during mixed dentition.

Erosive Tooth Wear in Subjects with Normal Occlusion: A Pioneering Longitudinal Study up to the Age of 60.

The aim of this study was to assess the erosive tooth wear (ETW) at early and mature adulthood in subjects with natural normal occlusion. The sample consisted of 23 untreated subjects with normal occlusion. Dental models were taken longitudinally from the same subjects at 13 (T0), 17 (T1) and 60.9 years of age (T2) at a university. Evaluation of ETW was performed using a modified Basic Erosive Wear Examination (BEWE) index. Interphase changes were evaluated using Friedman and Dunn's test. Ordinal logistic regression was used to assess the influence of sex, dental arch, tooth and dental surfaces on the erosive tooth wear. Linear regression was used to evaluate whether the ETW degree at T1 could discriminate the degree of ETW at T2. The significance level adopted was 5%. ETW showed a significant increase with aging. The median ETW index at T0, T1 and T2 was 2, 4 and 7, respectively. ETW was greater in males in the incisors and canines and on the incisal/occlusal and lingual tooth surfaces. No significant differences were found between the maxillary and mandibular arches. Subjects with severe ETW at mature adulthood had greater tooth wear at age 17. In conclusion, ETW significantly increased during aging in subjects with normal occlusion. The greater the degree of tooth wear at early adulthood, the greater the tooth wear at mature adulthood. Preventive care should be recommended during early adulthood in patients demonstrating erosive tooth wear in order to avoid worsening with aging.

Vertical and sagittal changes produced by an expander with differential opening and fan-type expander: A post-hoc analysis of a randomised controlled trial.

OBJECTIVE: To compare the sagittal and vertical cephalometric effects in participants treated with an expander with differential opening (EDO) versus the fan-type expander (FE). DESIGN: Two-arm parallel randomised clinical trial (RCT). METHODS: This study comprised cone-beam computed tomography-derived cephalometric images from 48 participants from a RCT. The sample was randomly allocated into two groups. The study was single-blinded. In total, 24 participants were treated with rapid maxillary expansion (RME) using EDO and 24 participants underwent RME using FE. The primary outcomes were the dentoskeletal vertical changes produced by RME. The secondary outcomes were the dentoskeletal sagittal changes. A cephalometric analysis was performed before treatment and 1 or 6 months after the active phase of RME using Dolphin Imaging Software. Intergroup comparisons of interphase changes were performed using the t-test and Mann-Whitney U test (P < 0.05). RESULTS: The final sample comprised 24 patients (11 men, 13 women; mean age = 7.6 ± 0.9 years) in the EDO group and 24 patients (10 men, 14 women; mean age = 7.8 ± 0.9 years) in the FE group. Both expanders produced a similar clockwise rotation of the mandible (FMA; mean difference [MD] = 0.09°, 95% confidence interval [CI] = -1.01 to 0.84). In the FE group, a greater increase of the SNA angle was observed after expansion compared to the EDO group (MD = 1.04°, 95% CI = -1.90 to -1.58). A greater palatal torque of maxillary incisors was observed in the FE group (MD = 1.32°, 95% CI = 0.05-2.56). Of the participants, 54% reported a little discomfort during the active phase of treatment and 46% of the participants did not report any discomfort. CONCLUSION: Both expanders produced similar vertical cephalometric changes. FEs caused slightly more maxillary anterior displacement after expansion with a compensatory palatal torque of the maxillary incisors compared to the EDOs. However, the amount of sagittal difference was not clinically relevant. TRIAL REGISTRATION: The trial was registered at ClinicalTrials.gov, under the identifier NCT03705871.

Interpretable artificial intelligence for classification of alveolar bone defect in patients with cleft lip and palate.

Cleft lip and/or palate (CLP) is the most common congenital craniofacial anomaly and requires bone grafting of the alveolar cleft. This study aimed to develop a novel classification algorithm to assess the severity of alveolar bone defects in patients with CLP using three-dimensional (3D) surface models and to demonstrate through an interpretable artificial intelligence (AI)-based algorithm the decisions provided by the classifier. Cone-beam computed tomography scans of 194 patients with CLP were used to train and test the performance of an automatic classification of the severity of alveolar bone defect. The shape, height, and width of the alveolar bone defect were assessed in automatically segmented maxillary 3D surface models to determine the ground truth classification index of its severity. The novel classifier algorithm renders the 3D surface models from different viewpoints and captures 2D image snapshots fed into a 2D Convolutional Neural Network. An interpretable AI algorithm was developed that uses features from each view and aggregated via Attention Layers to explain the classification. The precision, recall and F-1 score were 0.823, 0.816, and 0.817, respectively, with agreement ranging from 97.4 to 100% on the severity index within 1 group difference. The new classifier and interpretable AI algorithm presented satisfactory accuracy to classify the severity of alveolar bone defect morphology using 3D surface models of patients with CLP and graphically displaying the features that were considered during the deep learning model's classification decision.

Aging changes in maxillary anterior teeth in untreated individuals: an observational longitudinal study.

OBJECTIVE: The aging of the occlusion and tooth wears influence the smile design This study aimed at evaluating the aging changes of maxillary anterior teeth in nontreated subjects. METHODS: The sample comprised dental models of 23 subjects (13 male, 10 female) with normal occlusions, taken at 13 (T1), 17 (T2) and 61 (T3) years of age. The following variables were measured in the maxillary anterior teeth using digital dental models: crown width/height proportion, anterior view width, crown angulation, gingival and incisal steps between central/lateral incisors and central incisors/canines. Interphase comparisons were evaluated using repeated measures analysis of variance followed by Tukey tests or Friedman tests. Sexual differences were evaluated using t tests (P < 0.05). RESULTS: From 13 to 61 years of age, a decrease of crown width/height proportion (P = 0.008 and P = < 0.001, for the lateral incisor and canines, respectively) and mesiodistal angulation (P = < 0.001, P = 0.001 and P = 0.025 for the central incisor, lateral incisor and canines, respectively) of the maxillary anterior teeth were observed. The steps of the gingival margin and the incisal steps decreased with aging. CONCLUSIONS: From adolescence to late adulthood, untreated individuals with normal occlusions demonstrated changes in the maxillary anterior teeth that may impair the smile esthetics and attractiveness.

Comparison of nasal cavity changes between the expander with differential opening and the fan-type expander: a secondary data analysis from an RCT.

INTRODUCTION: The aim of this study was to compare the nasal cavity skeletal changes between the expander with differential opening (EDO) and the fan-type expander (FE). METHODS: This study was a secondary analysis of a previous randomized clinical trial. Forty-eight patients with posterior crossbite were randomly allocated into two study groups. Twenty-four patients (11 male, 13 female) with a mean initial age of 7.6 ± 0.9 years were treated with rapid maxillary expansion (RME) using the EDO. Twenty-four patients (10 male, 14 female) with a mean initial age of 7.8 ± 0.9 years were treated with the FE. Cone-beam computed tomography (CBCT) was performed before treatment and 1 to 6 months after the active phase of RME. Using frontal CBCT slices passing at the level of maxillary permanent first molars and maxillary deciduous canines, the width of the nasal cavity was measured in the lower, middle and upper thirds. Nasal cavity height was also evaluated in both slices. Intergroup comparisons of interphase changes were performed using t or Mann-Whitney tests (P < 0.05). RESULTS: The two groups were similar regarding baseline data. EDO showed a greater transverse increase in the lower third of the nasal cavity in both canine (P = 0.007) and molar regions (P < 0.001). No intergroup difference was observed for changes in middle and upper widths and height of the nasal cavity. CONCLUSIONS: Both expanders are effective in promoting an increase of the nasal cavity skeletal dimensions. The expander with differential opening produced a greater transverse increase in the lower third of the nasal cavity compared to the fan-type expander, both at the anterior and posterior regions of the maxilla. CLINICAL RELEVANCE: EDO might be more beneficial to pediatric patients with oral breathing and obstructive sleep apnea compared to FE.

Growth Outcomes Audit for Unilateral Cleft Lip and Palate (UCLP) After 2-stage Palate Repair.

PURPOSE: To assess the impact of 1 and 2-stage palatoplasty protocol on the dental arch relationships in unilateral cleft lip and palate (UCLP) in a single center. METHODS: Our study consisted of 349 individuals divided into 2 groups according to the palatoplasty protocol. Two-stage group comprised 169 subjects with UCLP (mean age: 6.9 y, 110 male and 59 female) who underwent lip, nasal ala, and anterior palate repair with vomer flap from 3 to 6 months (first surgery stage). Soft palate repair occurred from 12 to 18 months (second surgery stage). The one-stage group comprised 180 subjects with UCLP (mean age: 7.2 y, 108 male and 72 female) who underwent 1-stage palatoplasty. Dental models were evaluated by 3 experienced orthodontists applying Goslon Yardstick and the 5-year-old index (FYOI). The influence of the palatoplasty technique and surgeon factor on the interarch relationship was evaluated. The weighted Kappa was used to assess intraexaminer and interexaminer agreements for comparisons of dental arch relationships. Intergroup comparisons were conducted using the χ 2 test ( P <0.05). RESULTS: The intraexaminer reliability was very good (0.81 to 0.98) and interexaminer reliability varied from satisfactory to very good (0.56 to 0.83). The mean occlusal index of the 2-stage and 1-stage groups was 2.77 and 3.03, respectively. The variability of the mean index between surgeons varied from 2.38 to 3.2 in the 2-stage group and 2.91 to 3.2 in the 1-stage group. There were significant differences in the frequency of Goslon 5 index ( P =0.002) between groups, with the 2-stage group presenting less cases (1.18%) than the group 1-stage (11.11%). CONCLUSION: The interarch relationship was similar for both palate repair protocols. Two-stage palatoplasty showed a decreased prevalence of Goslon index 5.

Mandibular second premolar distoangulation: a longitudinal follow-up from the mixed to the permanent dentition.

OBJECTIVE: The aim of this study was to assess the frequency of mandibular second premolar (MnP2) distoangulation among orthodontic patients and the angular changes after a longitudinal follow-up. METHODS: The sample was collected from the orthodontic records of 865 patients. The distoangulation group was composed of 42 patients (mean age 9.29 ±â€…1.24 years, 16 male, 26 female) with distoangulation of MnP2. The control group was composed of 32 patients (mean age 9.38 ±â€…1.10 years, 15 male, and 17 female) without distoangulation of MnP2. Panoramic radiographs taken in the mixed (T1) and the early permanent dentition (T2) were analyzed in both groups. Longitudinal angular changes (distal angle θ and premolar-molar angle γ), degree of root formation, second premolar depth, and prevalence of associated dental anomalies were analyzed. Intergroup comparison was performed with Mann-Whitney, t-tests, and chi-square tests (P < 0.05). RESULTS: The prevalence of MnP2 distoangulation in the mixed dentition was 4.85%. The distoangulation group showed a smaller initial distal angle (59.34o ±â€…8.41) when compared to control group (79.88o ±â€…7.60). The spontaneous eruption of the MnP2 with distoangulation was observed in 76.57% of the sample. MnP2 distoangulation was significantly associated with agenesis of its antimere, small maxillary lateral incisors, and deciduous molar infraocclusion. LIMITATIONS: Severe cases of MnP2 distoangulation were absent in this study. CONCLUSIONS: The frequency of MnP2 distoangulation among orthodontic patients was 4.85%. Mild to moderate distoangulated Mnp2 spontaneously uprighted from the mixed to the permanent dentition. Small lateral incisors, second premolar agenesis, and infraocclusion of deciduous molar were frequently found in cases with MnP2 distoangulation.

Spontaneous changes in mandibular incisor crowding from mixed to permanent dentition: a systematic review.

INTRODUCTION: Dental crowding is the most prevalent malocclusion in the mixed and permanent detitions and can have a major impact on dentofacial esthetics. However, adjustments to the development and growth of the dentition can potentiate self-correction of dental crowding during childhood. OBJECTIVE: To evaluate the physiological behavior of mandibular incisor crowding in the transition from mixed to permanent dentition. METHODOLOGY: Five electronic databases (PubMed, Scopus, Web of Science, LILACS and LIVIVO) and part of the gray literature (Proquest and Google Scholar) were investigated, based on the eligibility criteria associated with the acronym PECO, until June 2022. The risk of bias was assessed using the ROBINS-E tool and the certainty of evidence, the GRADE tool. RESULTS: Among the 2.663 studies identified, five were selected for qualitative analysis, of which one have a low risk of bias, and four, a moderate risk. A total of 243 patients were evaluated. Evidence with a high level of certainty was generated indicating a tendency for improvement in mandibular incisor crowding from mixed to permanent dentition, with mandibular incisor crowding decreasing from 0.17 to 4.62 mm on average. The mandibular incisor crowding reduction seems to be associated with the amount of initial crowding and spontaneous dental arch dimensional changes that occur in the mixed dentition and culminate in the increase in arch perimeter, leeway space, incisor protrusion and transverse growth of the maxillary and mandibular arch. CONCLUSION: Based on moderate scientific evidence, spontaneous longitudinal changes in dental arch in the transition from the mixed to the permanent dentition demonstrate a spontaneous improvement in mandibular incisor crowding by up to 4.62 mm. These evidence provide a scientific basis for planning only longitudinal follow-up in patients with mild to borderline moderate mandibular incisor crowding in the mixed dentition avoiding overtreatment.

Finite element analysis of two skeletally anchored maxillary molar distalisation methods.

OBJECTIVE: To compare two methods of maxillary molar distalisation with skeletal anchorage using finite element analysis (FEA). METHODS: Two digitised models were created: the miniscrew-anchored distaliser, which consisted of a distalisation method anchored in a buccal miniscrew between the first molar and second premolar (Model 1), and the miniscrew-anchored palatal appliance, which consisted of a distalisation method anchored in a miniscrew on the anterior region of the palate (Model 2). FEA was used to simulate both methods, assessing teeth displacements and stress concentration. RESULTS: The miniscrew-anchored distaliser showed greater buccal than distal displacement of the first molar, while the opposite was observed in the miniscrew-anchored palatal appliance. The second molar responded similarly in the transverse and anteroposterior perspectives with both appliances. Greater displacements were observed at crown level than in apical regions. Greater stress concentration was observed at the buccal and cervical regions of the crown in the miniscrew-anchored distaliser and the palatal and cervical regions in the palatal appliance. The stress progressively spread in the buccal side of the alveolar bone for the miniscrew-anchored distaliser and in the palatal root and alveolar bone for the palatal appliance. CONCLUSION: FEA assumes that both appliances would promote maxillary molar distalisation. A skeletally anchored palatal distalisation force seems to provide a greater molar bodily movement with less undesirable effects. Greater stress is expected at the crown and cervical regions during distalisation, and the stress concentration in the roots and alveolar bone depends directly on the region the force was applied.

Early orthognathic surgery with postsurgical bone-anchored retention in unilateral cleft lip and palate: A case report.

We present a case report of early Le Fort I osteotomy with maxillary advancement retained postoperatively by Class III elastics anchored on miniplates in a growing patient with complete unilateral cleft lip and palate (UCLP). A 14-year-old boy who underwent orthognathic surgery at the pubertal growth spurt was presented. During surgery, Bollard miniplates were installed in the posterior region of the maxilla and in the anterior region of the mandible. Class III elastics anchored on miniplates were used at night (8-10 h) starting 60 days after surgery. The force of the elastics progressively increased from 100 g to 250 g. The elastics were replaced daily. The positive overjet remained stable over 15 months of postoperative follow-up. Maxillary advancement was adequately retained using Bollard miniplates and the facial profile remained stable until the end of facial growth.

Three-dimensional changes after maxillary molar distalization with a miniscrew-anchored cantilever.

OBJECTIVES: To evaluate the changes after maxillary molar distalization in Class II malocclusion using the miniscrew-anchored cantilever with an extension arm. MATERIALS AND METHODS: The sample included 20 patients (9 male, 11 female; mean age 13.21 ± 1.54 years) with Class II malocclusion, treated with the miniscrew-anchored cantilever. Lateral cephalograms and dental models obtained before (T1) and after molar distalization (T2) were evaluated using Dolphin software and 3D Slicer. Superimposition of digital dental models using regions of interest on the palate was performed to evaluate three-dimensional displacement of maxillary teeth. Intragroup change comparisons were performed using dependent t-test and Wilcoxon test (P < 0.05). RESULTS: The maxillary first molars were distalized to overcorrected Class I. The mean distalization time was 0.43 ± 0.13 years. Cephalometric analysis demonstrated significant distal movement of the maxillary first premolar (-1.21 mm, 95% confidence interval [CI]: -0.45, -1.96) and maxillary first (-3.38 mm, 95% CI: -2.88, -3.87) and second molars (-2.12 mm, 95% CI: -1.53, -2.71). Distal movements increased progressively from the incisors to the molars. The first molar showed small intrusion (-0.72 mm, 95% CI: 0.49, -1.34). In the digital model analysis, the first and second molars showed a crown distal rotation of 19.31° ± 5.71° and 10.17° ± 3.84°, respectively. The increase in maxillary intermolar distance, evaluated at the mesiobuccal cusps, was 2.63 ± 1.56 mm. CONCLUSIONS: The miniscrew-anchored cantilever was effective for maxillary molar distalization. Sagittal, lateral, and vertical movements were observed for all maxillary teeth. Distal movement was progressively greater from anterior to posterior teeth.